Planning

Do You Have to Insulate a Roof When You Replace It?

Why replacing a roof usually means upgrading its insulation, the standard building control expects, warm and cold roofs explained, and what it adds to the cost.

Illustration of a cutaway pitched roof with insulation laid across the loft joists

Yes, when more than half of your roof is stripped and rebuilt, or a flat roof waterproof layer is replaced, building regulations expect you to upgrade your roof insulation. A roof is classed as a thermal element, so in England the whole roof should be brought up to a better standard of insulation where that is technically possible and pays for itself within 15 years.

Why a new roof usually means better insulation

Your roof does more than keep the rain out. In building control terms, it is a thermal element that stops heat escaping from your home. Building regulations treat a roof replacement as the time to bring the insulation up to a better standard.

The rules rely on a measurement called a U-value, which tracks how quickly heat passes through a material. A lower number means less heat escapes and the insulation is doing a better job. For a roof that is being renovated, the target in Approved Document L is 0.16 W/m²K. The threshold figure of 0.35 W/m²K applies to a roof that is kept rather than renovated, for example in a loft conversion, where a roof worse than 0.35 W/m²K should be upgraded to 0.16 W/m²K.

These rules apply to both pitched and flat roofs. They cover homes with concrete and clay tiles, as well as those with natural and fibre cement slate. The upgraded roof must be no worse than it was before the work started, and the exact method your roofer uses to reach the target depends on how your roof is built.

When the rules apply

Renovating a thermal element means stripping it down to the basic structure and rebuilding it. On a pitched roof, this means taking off the tiles, the timber battens and the waterproof underlay (often called felt or membrane) to expose the rafters. On a flat roof, it means completely replacing the waterproof membrane that sits on top of the timber deck.

In England, repairing or re-covering a roof does not normally need a building control application if less than 25 per cent of the building envelope and less than 50 per cent of the roof is affected. Above that threshold, building regulations approval is needed and the insulation will usually have to be upgraded.

You do not always have to apply to the council yourself. If you use a registered roofer, they can self-certify the work. The government lists authorised competent person schemes for roof coverings, including CompetentRoofer and NAPIT, in its list of competent person schemes, and each scheme has its own register of members. They notify the council for you, and you receive a building regulations compliance certificate when the job is finished. Otherwise, the work must go through council building control or a registered building control approver.

The figures in this guide come from the approved document for England. The 2021 edition applies to work happening now, and the 2026 edition, which takes effect on 24 March 2027, keeps the exact same roof figures. Rules differ in Scotland, Wales and Northern Ireland, so you should check with your local council rather than guessing.

The standard building control expects

The main target for an upgraded roof is a U-value of 0.16 W/m²K. However, the rules are practical and acknowledge that older houses were not built for modern insulation. You are only expected to meet this standard if it is technically and functionally feasible, and if the cost of the insulation achieves a simple payback of 15 years or less.

If achieving 0.16 W/m²K fails those tests, the element should be upgraded to the lowest U-value that is feasible and pays back within 15 years. Generally, an upgraded thermal element should not have a U-value worse than 0.7 W/m²K.

Building control also allows for physical limits. If adding thick insulation would limit the headroom in a loft room, a lesser standard may be appropriate, providing the insulation and any air gap are at least as deep as the rafters. There are similar relaxations for a flat roof if there are problems with the load-bearing capacity of the frame or the height of the upstand at the edges.

If your existing covering is replaced with a different material, for example swapping slate to tiles, the new covering might be significantly heavier or lighter than the existing one. In these cases, the roof structure may need modifying or strengthening at the same time as the insulation is added.

Insulating a loft you do not use

Most houses in the UK have a cold roof. This means the insulation is laid between the joists at ceiling level, keeping the heat inside the rooms below. The empty loft space above the insulation stays cold and is ventilated to prevent damp.

When a roofer renews a pitched roof covering where there is no living accommodation in the roof, they will check the existing insulation. If the current ceiling-level insulation is under 50mm, poor or likely to be disturbed, it must be upgraded. The typical answer to reach the 0.16 W/m²K target is laying 250mm of mineral fibre or cellulose fibre quilt between and across the ceiling joists, or using loose fill.

You do not always have to start from scratch. Where existing insulation of 50mm to 100mm is in good condition, it can simply be topped up with new material to reach at least 250mm.

Rooms in the roof

If your loft has been converted into a living space, the insulation has to follow the shape of the roof itself. This involves creating either a cold structure or a warm structure.

A cold structure places the insulation between and below the timber rafters. A warm structure places the insulation between and above the rafters. Both methods require careful detailing around the edges of the roof to ensure the verge, eaves, and the ridge at the top are completely weatherproof. The roofer must also ensure that the lead flashing around your chimney is securely refitted so water cannot get behind the new insulation.

Adding insulation above the rafters raises the height of the roof. Where the extra thickness causes problems, particularly in terraced houses where your roof meets a neighbour's property, building control accepts that a lower target may be necessary to avoid a mismatched roofline.

Flat roofs

Flat roofs use entirely different materials to pitched roofs. The waterproof layer is typically built-up felt (usually torch-on), EPDM rubber, GRP fibreglass, single-ply or liquid coatings.

When renewing a flat roof covering where the existing insulation is less than 100mm of mineral fibre or an equivalent material, or is in poor condition, the insulation must be upgraded. The rules state that insulation should be placed between and over the joists as required to reach 0.16 W/m²K.

A warm roof design, where rigid insulation boards are placed above the timber deck, is a common way to insulate a flat roof, and the condensation risk still has to be assessed. If you are planning this kind of work, reading a flat roof replacement cost guide will help you understand the full process.

Condensation and ventilation

Adding thick insulation changes how air moves through your home. If warm, moist air from your bathroom gets trapped in a cold loft, it turns into water. This is why poorly planned insulation can cause damp, mould and rotting timber.

Building control rules state that the condensation risk must be assessed whenever a roof is upgraded. Your roofer must follow official standards to ensure enough fresh air flows through the roof space. In a standard house, a draughty loft above ceiling-level insulation is generally a dry loft.

On a cold roof, the roofer may fit vents at the eaves, usually in the soffits, to draw air in, and at the ridge or high on the roof to let it out. Ventilation is just as important in the complex areas of the roof. If your home has a valley where two angles join, or a hip where the roof slopes down to the corner of the walls, the roofer must ensure the air path is not blocked by the new insulation.

Why spray foam is not a shortcut

Some companies sell spray foam insulation as a quick way to upgrade a roof without stripping the tiles. The Royal Institution of Chartered Surveyors urges homeowners to be cautious.

If there is a roof leak behind some types of spray foam insulation, you may not notice it. This undetected leak can lead to rotting timber hidden entirely from view. Incorrectly installed insulation can also lead to dampness such as uncontrolled condensation.

Because of these risks, spray foam is a factor that could affect a surveyor's opinion of your home's value, and a surveyor may ask for a specialist report. RICS advises that you should never accept cold-call or unsolicited offers for spray foam, and you should always check with your mortgage lender and insurer first.

Insulation offers are sometimes used by cold callers as a way in. Be wary of any firm that shows these warning signs:

  • Cold callers who claim to have spotted a loose tile or moss from the street.
  • High pressure to make a decision today.
  • Demands for cash only or unusually big deposits.
  • Vague one-line quotes with no fixed address for the business.
  • Firms selling pressure washing as maintenance, which can severely damage your tiles.
  • Companies making bold claims about roof coating and painting, which are rarely permanent fixes.
  • Guarantees that are not insurance-backed, making them worthless if the firm folds.

What insulation adds to the cost

Small roof repair costs are usually charged at a fixed price or a day rate, but larger work like re-roofing and insulating is priced per square metre plus the cost of access. The total depends on the material you choose and the size of your home.

The table below shows the cost of different insulation materials supplied and fitted.

Insulation material

Cost per square metre

Fibreglass or mineral wool

£14 to £24

PIR insulation boards for a warm deck

£25 to £60

Warm deck insulation on a flat roof

£30 to £35

Spray foam

£35 to £55

These are typical published prices for 2026, and local quotes will differ depending on where you live. Prices are generally higher in London and the South East.

To give a practical example, insulating a 20 square metre area with mineral wool costs £400 to £480 and typically takes one to two days. Scaffolding is often a separate and significant line on your quote. Waste removal and VAT may or may not be included, so you must ask the roofer to confirm exactly what the final price covers.

Questions to ask your roofer

Nobody can see rotten timber until the old covering is off, so a good quote says exactly how extra work will be priced. Before you hire a firm, ask these questions to ensure they are pricing the job correctly.

  • Are you registered with a competent person scheme to self-certify the building regulations certificate?
  • If you are not registered, have you included the cost of the council building control application in this quote?
  • How will you assess the condensation risk and what ventilation will you install?
  • Does this written quote include the cost of scaffolding, waste removal and VAT?
  • What is your day rate or square metre rate if you find rotten timber under the old tiles?
  • Do you offer an insurance-backed guarantee that protects me if your firm stops trading?

A written quote is a fixed price, while an estimate is not. Under the Consumer Rights Act 2015, the work must be done with reasonable care and skill. If it is not, you can ask for it to be put right or for your money back. Contracts agreed at home, by phone or online normally carry a 14-day cooling-off period, but if you ask for work to start inside that period, you must pay for what has been done.

Common questions

Can I replace a roof covering without upgrading the insulation?

In England, if more than 50 per cent of the roof surface is renovated, which includes replacing the waterproof membrane on a flat roof, the whole roof should be upgraded to 0.16 W/m²K. Where that is not technically feasible or would not pay back within 15 years, the roof should still be improved to the best standard that is feasible and pays back within 15 years, and generally to no worse than 0.7 W/m²K.

Do building regulations apply to conservatory roofs?

Replacing a glazed or polycarbonate conservatory roof with a solid one takes the conservatory out of its normal exemption. This means building regulations apply to the new solid roof, and it must meet the required insulation standards.

What happens if I do not get a building regulations certificate?

Going without the building regulations compliance certificate causes serious problems when you want to sell your home. A buyer's solicitor is likely to ask for the paperwork, and without it the sale can be delayed while the problem is sorted out.

Does paying by credit card offer extra protection?

Paying by credit card gives you Section 75 protection on purchases over £100 and up to £30,000. This means the credit card company is jointly liable if the roofing firm goes out of business or fails to do the work properly. If you end up in a dispute with a tradesperson, Citizens Advice is the best place to get legal guidance.

Next steps

Before you agree to a roof replacement, make sure you understand exactly what insulation is included and how it will be signed off. Follow this checklist to keep your home safe and legal.

  • Take photos of any visible defects from the ground or from inside the loft, but never climb on a roof or use ladders at height yourself.
  • Get three written, itemised quotes that separate the cost of the roof covering, the insulation, the scaffolding and the waste removal.
  • Look for membership of TrustMark, the government-endorsed quality scheme for work in and around the home, and check the scheme's own register. Membership is a good sign, not a guarantee.
  • Ask for proof of public liability insurance and employers' liability insurance.
  • Agree a staged payment plan and only make the final payment when the job is completely finished and you have the compliance certificate.

Replacing a roof is a major investment, but doing it by the book helps keep your home warm, dry and straightforward to sell. When you are ready to get quotes, you can find a roofer near you to inspect your property and explain your options in detail.

Find a top rated roofer near you

3,859 roofers across the UK, each ranked on their Google rating and the number of reviews behind it. Start with your county:

All counties and towns · The UK Top 100 roofers

Gavin Doyle
Written by
Gavin Doyle Editor

Gavin is a writer and editor for Top Rated Roofers, covering roofs, repairs and roofing work. When he's not writing guides, he is never far from a cryptic crossword.

Looking for a trusted roofer? Browse our verified listings.

Find a Roofer